EPSON LX300+ PRINTER AUTO TEAR OFF SETTING

1- Turn off your EPSON LX300+ Brand printer normally.
2- Open your printer by holding down the font button on your printer. With 1 paper
will come as a printout from your printer.
3- Press the font key of your printer for the 2nd time.
4- Press the font key of your printer for the 3rd time.
Pages 3, 4 and 5 will be printed.
5- At the bottom of the last page you will see “Turn off the print to finish setting”.
6- Press the Font button repeatedly (2 times). Make sure that the Tear off on your printer
the one to the right of the lights on the right and the light next to Pause should be on.
7- Press the LF/FF button once
8- If the Pause button is lit, press the LF/FF button once more.
9- After these steps, Pause’s light should be off and Tear Off’s light should be on.
10- Turn your printer off and on again.